It was time to start the work I really wanted to do�. So into the boat, and started the removal of Cross-Members. These came out by just pulling on them, except for one� That just needed a little nudge from my foot! Still came out very easily though� A little bit of a worry.

I was rather nervous about this step. I was not sure if the trailer would support it well enough with my weight wandering around inside the hull. I was trying to work out if it would be better supported on car tyres. However, I spoke to quite a few people, and they all said to leave the hull on the trailer. I was warned that the hull will �flex� a bit as I�m wandering around, so I was not too worried when it happened.

This photo was taken just after the last Cross-Member was taken out. That floor at the back has to come out as well�