Here you can see how I had to scab two pieces to make the complete stringer, on the right side inboard stringer the scab is on the inside which is where it should be. If you look closely, forward on the lefthand inboard stringer the scab is on the outside, where it is not supposed to be. This was an error on my part, I will have to live with it. When it is done nobody will notice any different. I could have changed it at this point, but due to lack of funds I opted not to. It won't adversly affect anything, it will just make it more difficult when I goto put the cabin doors on. Also I have made a running design change to the fuel tank divider in the middle. I was going to bring it all the way up level with the floor, but I decided to duplicate what was originally there. As well as I didn't have enough room for the tank. Measure twice, and cut once. Yeah right :)