Useful Links
Savage Javelin Floor and Transom Replacement
Last Trip out before I Start
Out in the water for a run before Starting the Big Jobs
Making a start
Making a start
Wood Chips
The Floor was in Fairly poor condition (sorry no photos of floor removal)
The Transom
After having a bit of a dig around the Transom i realised it had to be all replaced.........Dred!
The Transom 2
Not fun!
The floor (or where it was)
(Floor reomved, Stringers yet to come out All wood is getting replaced
The Transom almost removed
This is part of the Transom almost all gone, A little bit to do. I Cleaned this back to the Glass with a Grinder that had a worn down wire brush attachment, Worked quite well.
Transom Test fitting
As you will notice the outer skin is still intact so i just slotted the new Transom down the back. I used two pices of 15mm ply laminated together with Epoxy resin with Glue Additive.
Inside View Of Transom Going in for test fitting
Inside View Of Transom Going in for Test fitting
Closer
close up of trial fitting
floor trial Fitting (seats just sitting there)
Getting Closer now. All that fibreglassing to go
The Old Trailer
The old Trailer being used as a template
New Trailer in the making
made out of glavinised tubular steel and bent and welded.
Boat on trailer
Almost in the Water
The Toys
The toys
the finished project ready for the water
sorry i dont have any inside photos at the moment (i did this project last year before i found this site I will post some soon
In the Water at the Shack
(Insert New Description)
Finally in Action!!!!
Off for a ski, Thats me in the Water My Fater in Law is the Driver and a mate Posing standing up